Yes We’re Still Blogging

11

Beryl is dreaming of far off places; I really think she’s ready to get back out to sea where she can happily chase her toys as the winds and waves push the boat side to side in the perfect pattern to roll her favorite balls, strings, and straws across the worn teak sole. We remain in a serene marina environment, enjoying the mild weather and doing projects.

223

I’m starting to get notes that say “what’s up?” from several people. Those made me realize I’ve not updated the blog about our goings-on for over a month! Why? Well, many of our projects are amazingly ordinary, small, and boring!

In early January, David completed his project of making cabinet doors for some key shelving areas; I then varnished them and he installed them. Here’s a pic of the doors about to be installed. Suppose I should take a shot of them after the fact, too. Or perhaps just let our readers wonder how it went…

We are preparing for our northward progress this spring–what that means is we finally got an EPIRB (great deal at the end of 2013 with rebate from ACR) and we purchased a Simrad broadband radar system with B&G Zeus chart plotter. We’ve pulled, out of storage, the radar platform the previous owner had and are trying to figure out how to install it on the mainmast without putting the radar in harm’s way of the foresail gaff boom. There will surely be an interesting tale of the installation once the radar arrives here in about a week.

I’m also replacing the temporary (going on 3 years…) rope guard lines (aka lifelines and breast lines) with Dyneema ones as well as going over, with David, every inch of rig and rigging replacing any shackles or other things which seem worn or potentially under-sized. I ordered a total of 28 thimbles for the various guard lines–that means 28 splices I’ve got to do. I’ll be really good at the Mobius Brummel splice by the time that project is done! A strange combination of new and old with those guard lines–I’m using very traditional looking bronze pelican hooks combined with the Dyneema. All the parts haven’t arrived so that project is just a pile sitting in the corner right now.

A couple weeks ago, we took off the mainsail so I could put replacement batten pockets onto it (new RBS sail battens ordered via Sailrite), David sanded and then I put 6 coats of varnish on the boom. It hadn’t been varnished since 2010, so it really needed it in some spots! We then bent on our “spare” mainsail–this meant changing some hardware on the boom to fairlead the reefing lines. That means I’ve got more cleanup and varnishing to do. Sigh. It also involved seizing on all the slides on the sail’s foot. The sail previously had a thimble system on the foot where one tightened up a wire running through the thimbles and matching thimbles on the boom to manage the outhaul. That system was designed for booms without a sail track.
1
.


.


.


.

That spare sail is interesting–it is a Watts sail made decades ago for the 75′ 1958 Rhodes ketch Kamalii (Kamali’i) to serve as a spare mizzen sail during ocean races. It was never used. So, brand new Dacron that is decades old. It is also heavy 13 oz material. Our other sails are 10 and 12 oz. The sail may only last a season or it may last a long time–we don’t know. We purchased it from Minney’s in Costa Mesa, CA and had sailmaker Skip Elliott of Elliott/Pattison in Newport Beach take out the roach, shorten the foot by about 8″ and add a single reef. The sail had no reef to begin with. We had the reef placed high where our second reef is on the other main sail. We literally never use the first reef on that sail as we’ve discovered that in heavy winds the mainsail quickly overpowers foresail, staysail and jib combined.

Skip Elliot immediately recognized the sail while it was still in the bag when we took it to his shop–it turns out the lovely hand stitching was unique to a particular sailmaker that Skip knew from long ago. He said “that sail was made by Albert and will have number 7175 on it, it belonged to Kamalii and I saw it as part of a sail survey I did for the boat many years ago.” He thought the sail was well worth the work to make it fit Mahdee and that it would last quite a while.
.
34

Watts sails must be quite recognizable to people “in the know” and it seems that would not include us, the Mahdee crew. Kamalii’s sail number must also be quite familiar to people as well. While we were putting the sail up at the dock, one of San Francisco’s Master Mariners came along the dock and said “That’s a nice sail–made by Watt’s, huh?” and “7175, that’s a SoCal number–is it Kamalii’s sail number?” Go figure. I then spent 6 hours painstakingly snipping the threads to remove the sail numbers from the sail! We have no intentions of racing Mahdee but I’m beginning to think we should put her sail number on her mainsail. We’d have to research it and discover which is her earliest and proper sail number. We have seen photographs with 188 and 288. A three digit number rather than today’s four.

Perhaps instead of longing for ocean passages, Beryl is just watching the birds near the boat. In any case, the migrating birds are enjoying the sunny days as much as we are.

33

Sewing Projects

Yesterday, I finally sat down and did a couple sewing projects. The first, I made two bolster pillows to match the curtains I made last year. The fabric is great–a black and white toile designed by artist Sue Coccia in her totem-style Animal Spirits line of cotton prints. This fabric has all sorts of sea creatures – crabs, sea otters, seals, stingrays, turtles, octopi, dolphins, sharks. Fun! I used a bright indigo blue fabric for the ends to tie into the pretty blue afghan our talented friend Monica made for us this summer. Have I mentioned I love deep blues? The Coccia fabric also comes in a lovely colorful version, but I like black-and-white or blue-and-white prints.

Once into the spirit of sewing, I moved on to another project. Our boat’s fender covers were looking pretty ragged–and the fenders themselves are no spring chickens–so I picked up a king size knitted blanket at Target and made nine fender covers ranging from huge down to itty bitty. I still have four more to cover so I may be going back to Target for a matching twin size blanket. These new covers are replacing ones I made in 2009 from fleece blankets but this time I decided the knit blanket pattern was soft enough to use as a cover and its style matched the boat. In Hervey Garrett Smith’s book The Marlinspike Sailor there is even something called a “fender hitch” for covering round things. That pattern of hitch looks a lot like this knit pattern.

The blanket and marlin started out as a pile on the seat next to me. Soon I was sewing and at the rate of one fender every half hour, my blanket was quickly consumed.

The largest extra-huge fenders seem to often find themselves as guard duty to keep the inflatable Tinker Traveler suspended above the galley butteryfly hatch.

We have small fenders that aren’t used for the hull so much as for everything else on deck that we’re trying to protect, it seems. For example…the canoe vs the deck works out best with a fender between the two of them. If we ever were willing to install chocks for dinghy and canoe, the fenders would be “off duty.”

Other fenders await their duties:

Normal guard duty for the large fenders in a slip

Next sewing projects? More fender covers and the biggie–making royal blue cushions for our charthouse seats. David really doesn’t like sitting on the wood bench seats without a cushion. I’ve had the fabric for several months…OK, about a year! and I now just need to take the time to make the cushions.

Boatyard Life

Mahdee is momentarily on the hard at the Ladd’s Marina in Stockton, CA. She’s getting all spiffed up with a 4 year touch up to her 10 year bottom paint…fairing of the hull above the waterline (port side) and new topside paint (all around) …replacement of the failing boot stripe paint (the primary reason for the haul out)…two additional cockpit drains… new prop shaft packing….and a half dozen other little things.

We do all our own work, as many friends know. We still wholeheartedly agree with the Lin and Larry Pardey saying of “If you can’t repair it, maybe it shouldn’t be on board.” Right before the haul out David climbed the mast, yet again, to remove the Airmar weather station so we may send it in for testing and repair. I’m beginning to wonder if that thing should be onboard. It works…sort of…but the gyro, compass, humidity, and GPS all don’t work. So–what does work? The wind speed, temperature, and barometer do work. We purchased the unit on Ebay as new old stock from a marine electronics shop in Florida. It has never worked entirely as it should but the Airmar folks have been surprisingly chipper about trying to fix it properly. I do wish we’d just purchased a new one from a regular dealer. The new ones don’t have a humidity sensor and I really wanted that feature…it has never worked though. I suppose there’s a reason why the new ones don’t have that feature, eh?

The boatyard here is an enjoyable experience. The employees are friendly, the owners are kind and caring people, the other DIY boats in the yard are owned by an interesting mix of characters, including other traveling boaters, as well. The boatyard is part of a small marina. The prices of the boatyard and marina are reasonable and there is good access to shopping close by.

We met up with a cruising boat here, SV Ballena, owned by Randy and Gina. We saw Randy and Gina a few weeks ago when we were in the Georgiana Slough. David and I were floating downstream in a three boat dingy raft-up with four other folks when Randy and Gina came along in Ballena. Randy anchored for a bit just down stream of where we were…while Gina collected some of the plentiful fall rose hips hanging down over the water in that area. We called out “hi” and wondered if we would cross paths again somewhere. So it was really fun to cross paths again so quickly here at Ladd’s just now. We were able to officially “meet” them and hear a lot about their four years of cruising–mostly in Mexico’s Sea of Cortez–as well as their Delta plans. They came up here from Mexico with the intent of spending a year, two, or more exploring the California Delta. As they left the marina yesterday, we made plans to see them again in a nearby anchorage after we re-launch Mahdee in a few days. Neither Mahdee nor Ballena have been to the particular anchorage, so it will be a good “exploration” for both.

Here are some pics of our present boatyard, projects, and Beryl’s antics while here.

David had a bird’s eye view from the top of the mast when he removed the Airmar weather station. Note all the floating water hyacinth in the working docks!

The boot stripe is now sanded off, the bronze parts all primed with the yellow Proline Strontium Chromate primer, and all the bare wood spots on the keel primed with orange/red lead paint.

The trailing edge of the rudder, around a wood bung, bleeds a bit of boat-soup (linseed oil, Stockholm tar, turpentine) that we used to lubricate the bronze drifts as they were driven into the oak as we built the rudder. These hold the oak in the rudder together nicely but the boat soup is getting squeezed out slowly as the oak swelled up after the boat’s launch in April 2009.

Our last haul out was in June 2010 and in general, the bottom paint (applied in March 2009 pre-launch and touched up in 2010) is in very good shape but it won’t stay on the bronze, the old oak keel seemed to pop paint off here-and-there and the new purpleheart countertimber is located close enough to the prop that the prop-wash seems to eventually take the paint off the countertimber.

As we work below and on ladders all day, Beryl sits above us on deck supervising and whining that we’re not giving her sufficient attention.

We’ve gotten out our old blue tarps to cover the boat against the dew or rain. She loves to play in the tarps and our biggest worry is that she’ll fall overboard while playing in a scrunched up tarp on deck.

It has been very windy for two days. The days have been lovely but with too much wind and too cold to paint. David gout the 1.5″ bronze check valves and thru hulls that have been stashed away under the berth. Now is time to install the additional 1.5″ cockpit drains from the cockpit seats to the transom. She has four 1.5″ cockpit drains in the cockpit sole already. Mahdee’s huge cockpit needs these drains to meet the ORC guidance for offshore (racing) yacht cockpit draining times of 3 minutes or less.

I’m hoping for less wind tomorrow since we’ve had three days of strong winds so far that have precluded painting on those days. The FLS transducers can be painted tomorrow even if it is windy and I can start the interior clean-up of the boat in preparation for re-launch. We have two weeks worth of laundry to do since we’re not hooked up to a shore drain or water I can’t use my washer but will have to use the marina facilities instead.

Google Analytics Alternative